MUNICIPAL EQUIPMENT EXPORTERS INC. DBA MAX-LIFE MFG. CORP
Showing 1–16 of 21 results
Center pin locks on to coupling, latch hook and unhooks sewer rod coupling to tighten or untighten the line of sewer rods.
| 5/16” | 3/8” | Description |
| MAH-1 | MAH-18 | Assembly Turning Handle, to Steady Rods While Connecting |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Assembly wrench for sectional or continuous sewer rod has curved handle to provide the correct amount of torque when tightening.
| 5/16” | 3/8” | Description |
| MAT-1 | MAT-18 | Assembly Wrench, Used for Tightening Rod Connection |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
This style auger chuck is used with the 1″ hydraulic root cutter motor or the drive spud & threadless quick coupling. Exchange tools much faster and less hassle threading on equipment. It has a set screw instead of bolt.
| Part No. | Description |
| AW2105 | Auger Chuck with Hardware |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Replacement coupling for Auger, please verify your auger size and rod size.
| 5/16″ | 3/8″ | Description |
| RAC-5 | RAC-3 | 3″ and 4″ Auger Couplings with Side Bolt |
| RAC-5U | RAC-3U | 5″ and UP Auger Couplings with Side Bolt |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Center section of manual turning handle uses threaded union to hold onto sewer rod coupling allows too tightly close or “Latch on to the line of rods” for close manual turns for fast and efficient removal of roots or debris.
| 5/16” | 3/8” | Description |
| MBH-1 | MBH-18 | Bar Turning Handle – Short Manual Turns |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Designed for use with both the spring blades and a root saw together.
The spring blade chuck portion can be used in the standard configuration with the blades facing forward, or it can be reversed so the blades face back toward the root saw, when used on a rodder.
| Part No. | Description |
| AW2108 | Combination Chuck with Hardware |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Allows easy connection of the chucks to rodding sets.
| Part No. | Description |
| AW2109 | 5/16″ Drive Spud |
| AW2110 | 3/8″ Drive Spud |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Pick up tool is used with sectional rod or continuous sewer rod. This tool pick up rod that has been broken down in the pipe line during maintenance. This sewer rod tool is a must have for every rodding operator.
| 5/16” | 3/8” | Description |
| MPU-1 | MPU-18 | Pick-Up Tool for Sectional Rod |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
This tool does not have a pin as you center the coupling onto the slotted section and you would be able to pull on the string of rods allowing you that extra level of torque needed to get the sewer rods out the line.
| 5/16” | 3/8” | Description |
| MPT-1 | MPT-18 | Pull Out Tool for Rods – Push/Pull Tool |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
This tools has a locking pin that hold onto the rod center slotted hole in the middle of coupling , once the rods is secured in place you can Push, Pull & Turn the rods in and out of the sewer line.
| 5/16” | 3/8” | Description |
| MPT-2 | MPT-28 | Pull Out Turning Handle – Push/Pull/Turn |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
3/8” Fine L/H X 5/16” Coarse R/H – Adapter Coupling allows you to connect 3/8″ Rod with 5/16″ Rod / Tools
5/16” Fine L/H X 3/8” Coarse R/H – Adapter Coupling allows you to connect 5/16″ Rod with 3/8″ Rod / Tools
| Part No. | Description |
| MC-35 | 3/8″ Fine LH x 5/16″ Coarse RH |
| MB-36 | 5/16″ Fine LH x 3/8″ Coarse RH |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Made of steel material hitch has slotted area to hold the rod coupling and be pulled with a vehicle. Painted finish.
| Part No. | Description |
| MRP-2 | Rod Puller Hitch |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Connect our chucks to a hydraulic root cutter, or the EZ Chuck System, to connect to a rodder, or one of industry standard hydraulic root cutters with 1” drive spuds and 5/16” or larger bolt hole.
| Part No. | Description |
| AW2104 | Root Saw Chuck with Hardware |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Replacement Coupling for Sectional coupling for root saw.
| 5/16″ | 3/8″ | Description |
| RSC-5 | RSC-3 | Root Saw Coupling with Side Bolt |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Made of steel work with 1/4″, 5/16″ & 3/8″ sectional sewer rod. Allows to open and close function to push and pull rods where the roots are too heavy in the line.
| Part No. | Description |
| MRP-1 | Round Rod Puller 1/4” to 3/8” Rod |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.
Spear Head has an adapter rod that will fit your rods, option is 5/16″ Sewer rod adapter or 3/8″ Sewer Rod Adapter.
| 5/16” | 3/8” | Description |
| MSP-1 | MSP-18 | 2″ Spear Head – For Sectional Rod 5/16″ or 3/8 |
| MSP-2 | MSP-28 | 4″ Spear Head – For Sectional Rod 5/16″ or 3/8 |
Available for retail purchase on our official Shopify store.
Click the logo below to shop this product.